| |
WPD-40 |
WPD-50 |
| Drilling
Capacity in steel | 40
mm | 50
mm |
| Morse
taper in spindle | mt4 |
mt5 |
| Column
diameter | 195
mm | 195
mm |
| No.
of spindle speeds/range | 6(48-675
rpm) | 6(48-675
rpm) |
| No.
of spindle feed/range mm/rev. | 3(0.1,0.2,0.4) |
3(0.1,0.2,0.4) |
Distance
between column centre and
spindle centre |
460
mm | 460
mm |
| Working
table dimentions | 455
x 555 mm | 500
x 600 mm |
| No.
of-slots and size | 3
x 18 h12 | 3
x 18 h12 |
Maximum
distance from table to
spindle | 500
mm | 580
mm |
| Minimum
distance from table to spindle | 50
mm | 50
mm |
|
Maximum distance from base plate to spindle |
1170
mm | 1250
mm |
Minimum
distance from base plate to
spindle | 970
mm | 1050
mm |
| Vertical
travel spindle | 200
mm | 200
mm |
| Size
of base plate | 1170
x 655 mm | 1170
x 655 mm |
| No.
of t-slot and size | 3
x 18 h12 | 3
x 18 h12 |
| Drill
power | 2
hp | 3
hp |
| Coolant
pump | 0.10
hp | 0.10
hp |
| Approximate
weight of machine | 1200
kgs. | 1350
kgs. |
| Electric
panel | as
required | as
required |
| Overall
size of the machine | 1170
x 760 x 2500 mm | 1170
x 760 x 2650 mm |
